跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

Step 2
Use a sharpie or similar, mark the side brackets on either side of the LCD panel before removing screws as they are different Use a T10 Torx driver to remove the 2 screws from each side bracket (total 4 screws) Use a T10 Torx driver to remove the 2 screws from each side bracket (total 4 screws)
  • Use a sharpie or similar, mark the side brackets on either side of the LCD panel before removing screws as they are different

  • Use a T10 Torx driver to remove the 2 screws from each side bracket (total 4 screws)

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可