跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
When the new seal is between where the trip lever is connected to tank and where trip lever protrudes through square trip lever holder, for a moment, pull the flexible water refill tube out of the center of the stop cap.  Point the free end of it down, as water may still be coming through it after flushing. Take the new seal just over the stop cap and replace the water refill tube, being careful not to splash any water coming out of it. Take the new seal just over the stop cap and replace the water refill tube, being careful not to splash any water coming out of it.
  • When the new seal is between where the trip lever is connected to tank and where trip lever protrudes through square trip lever holder, for a moment, pull the flexible water refill tube out of the center of the stop cap. Point the free end of it down, as water may still be coming through it after flushing.

  • Take the new seal just over the stop cap and replace the water refill tube, being careful not to splash any water coming out of it.

当新的密封件位于脱扣杆连接到水箱之间并且跳闸杆通过方形跳闸杆保持架突出时,暂时将柔软的补水管拉出挡块的中心。 将自由端指向下方,因为冲洗后水仍可能通过。

将新密封件放在止动帽上,更换注水管,小心不要溅出水。

在开源创作共享许可协议下,你的投稿已被许可