跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的80本指南

英语
中文

正翻译步骤 3

步骤 3
Use the tool like a pizza cutter—roll it along through the gap, and it will cut the foam adhesive through the center. Be sure to always push with the handle behind the cutting wheel. If you pull, the wheel might get pulled out of the handle. Run the tool up along the left side of the display.
  • Use the tool like a pizza cutter—roll it along through the gap, and it will cut the foam adhesive through the center.

  • Be sure to always push with the handle behind the cutting wheel. If you pull, the wheel might get pulled out of the handle.

  • Run the tool up along the left side of the display.

用像披萨刀一样的工具沿着缝隙滚动它,它会通过中间切开泡沫粘合剂。

一定要用推轮后面的把手推动。如果你拉,轮子可能被拉出把手。

沿着显示器的左侧运行工具。

在开源创作共享许可协议下,你的投稿已被许可