跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 1

步骤 1
Locate the 4 screws securing the disk drive assembly. There are two on each side. Use a narrow screwdriver to remove all 4 screws. Remove the blue ribbon wire from its connector. When doing this, be cautious to not damage the connector.
  • Locate the 4 screws securing the disk drive assembly. There are two on each side.

  • Use a narrow screwdriver to remove all 4 screws.

  • Remove the blue ribbon wire from its connector. When doing this, be cautious to not damage the connector.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可