注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
正翻译步骤 14
步骤 14
-
Use a spudger to gently pry up the end of the logic board closest to the dock connector.
注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。
Use a spudger to gently pry up the end of the logic board closest to the dock connector.
There is a small golden grounding tab on the logic board adjacent to the 'Do not remove' sticker. Be very careful this does not snag on the side of the case when prying up the logic board; it breaks easily! If you have signal problems after removing the logic board, check this ground tab.
If the board won't lift up, double check to make sure all 8 screws securing the logic board have been removed.
下一行
上一行
在下面插入新的一行
在上面插入新的一行
缩进当前行
取消缩进当前行
删除当前行
导航到下一步。
导航到上一步。
打开帮助