跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的14指南

英语
中文

正翻译步骤 10

步骤 10
Use a spudger to disconnect the ribbon cable labeled "6." If you have an iPhone 3GS, refer to the second picture and use a spudger to disconnect the ribbon cable labeled "7."
  • Use a spudger to disconnect the ribbon cable labeled "6."

  • If you have an iPhone 3GS, refer to the second picture and use a spudger to disconnect the ribbon cable labeled "7."

  • Be certain that the connectors on the ribbon cables are perfectly aligned with the sockets on the mother board before applying pressure. This may require a magnifying glass or jewelers' loupe.

使用spudger断开的带状电缆标记为“6”。

如果你有一个iPhone 3GS,参照第二图片和使用撬棒断开“7排线。”

确保在施加压力之前,带状电缆上的连接器与母板上的插座完全一致。这可能需要一个放大镜或珠宝放大镜。

在开源创作共享许可协议下,你的投稿已被许可