跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的14指南

英语
中文

正翻译步骤 4

步骤 4
Continue to hold the display assembly with one hand, and use your other hand and a spudger to disconnect the black ribbon cable labeled "1". (Cable 1 is for the display)
  • Continue to hold the display assembly with one hand, and use your other hand and a spudger to disconnect the black ribbon cable labeled "1". (Cable 1 is for the display)

  • Be careful to insert the spudger from the left, as shown in the picture (UNDER THE RIBBON). If you try to pry up the ribbon from the right, you could damage the ribbon connector and need to replace the display!

  • All connectors except the ribbon connector "3" mentioned in step 7 release upwards.

继续用一只手握住显示组件,并使用你的另一只手和spudger断开黑色带状电缆标记为“1”。(电缆1是显示器)

小心地从左侧插入spudger,如图所示(下带)。如果您试图从右侧撬起丝带,您可能损坏带状连接器并需要更换显示器!

除了带连接器“3”步骤7稿以上所有连接器。

在开源创作共享许可协议下,你的投稿已被许可