跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的14指南

英语
中文

正翻译步骤 2

步骤 2
Remove the metal handle from the suction cup. It's easier and safer to grip the suction cup's base instead of the metal handle.
  • Remove the metal handle from the suction cup. It's easier and safer to grip the suction cup's base instead of the metal handle.

  • Be very careful when opening the iPhone so that the cables under the display are not severed.

  • There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly. It may help to rock the suction cup back and forth to remove the display assembly.

  • Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.

  • If the display assembly is too damaged to allow the suction cup to adhere, tape with a strong adhesive such as duct tape or packing tape may be used.

从吸盘去除金属把手。这是更容易和更安全的抓地力的吸盘底座代替金属把手。

小心打开iPhone时,显示器下电缆不切断。

有一个银色的前面板和黑色显示组件之间的橡胶垫片。一点力,在这一步需要将iPhone的显示组件。这可能有助于岩石的吸盘来回拆卸显示器组件。

用一个小吸盘在Home键轻轻拉了iPhone的显示组件的底部。

如果显示组件损坏,使吸盘附着,具有很强的粘性胶带或胶带等包装胶带可用于。

在开源创作共享许可协议下,你的投稿已被许可