跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南

英语
荷兰语

正翻译步骤 1

步骤 1
Begin by using a heat gun or the iOpener (This will take longer.) to melt the adhesive all around the outer edge of the screen. Avoid holding the heat gun too close to the Microsoft Surface 2 so as to not cause any unwanted warping. Avoid touching the metal end of the gun. It will be very hot and can burn you.
  • Begin by using a heat gun or the iOpener (This will take longer.) to melt the adhesive all around the outer edge of the screen.

  • Avoid holding the heat gun too close to the Microsoft Surface 2 so as to not cause any unwanted warping.

  • Avoid touching the metal end of the gun. It will be very hot and can burn you.

  • Insert the opening picks just under the screen and black edging. Be sure to place them evenly on each side.

  • Using the gap created by the picks, slowly pry the screen from the body of the Microsoft Surface 2 with a plastic opening tool. Pry as uniformly as possible.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可