Skip to main content
英语
中文

正翻译步骤 2

Step 2
Remove the 4 Torx T10 screws and gently lift the lefts side up and angle the power supply as shown in the second photo. The bottom right screw is a metal thread screw,  all the others are a coarse thread self tapper
  • Remove the 4 Torx T10 screws and gently lift the lefts side up and angle the power supply as shown in the second photo.

  • The bottom right screw is a metal thread screw, all the others are a coarse thread self tapper

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可