跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 4

步骤 4
Continue to hold the display assembly with one hand, and use your other hand and a spudger to disconnect the black ribbon cable labeled "1."
  • Continue to hold the display assembly with one hand, and use your other hand and a spudger to disconnect the black ribbon cable labeled "1."

  • Ribbon cable "1" is connected with a plug style connector. The block at the end of the cable is the plug which is simply pushed into a socket on the circuit board. No other locking mechanism is used.

继续用一只手握住显示组件,用另一只手和支柱将标有“1”的黑色带状电缆断开。

带状电缆“1”与插头式连接器连接。在电缆末端的块是简单地插入电路板上的插座的插头。没有使用其他锁定元器件。

在开源创作共享许可协议下,你的投稿已被许可