跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 2

步骤 2
Remove the metal handle from the suction cup. It's easier and safer to grip the suction cup's base instead of the metal handle.
  • Remove the metal handle from the suction cup. It's easier and safer to grip the suction cup's base instead of the metal handle.

  • Be very careful when opening the iPhone so that the cables under the display are not severed.

  • There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly.

  • Use a small suction cup near the Home button to gently pull up the lower portion of the iPhone's display assembly.

  • If the display assembly is too damaged to allow the suction cup to adhere, tape with a strong adhesive such as duct tape may be used.

从吸盘中取出金属手柄。更容易和更安全地抓住吸盘的底部,而不是金属手柄。

打开iPhone时要非常小心,这样显示屏下方的电缆就不会被扯断。

在银色挡板和黑色显示组件之间有一个橡胶垫圈。在这个步骤中需要一点力来分离iPhone的显示器组件。

在主屏幕按钮附近使用一个小吸盘轻轻地拉动iPhone显示屏组件的下部。

如果显示组件损坏得太厉害,不能允许吸盘粘附,可以使用带有强粘合剂的胶带,例如胶带。

在开源创作共享许可协议下,你的投稿已被许可