跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 8

步骤 8
Near the center of the display, carefully insert a metal spudger into the gap created by the plastic opening tool.
  • Near the center of the display, carefully insert a metal spudger into the gap created by the plastic opening tool.

  • It is easy to create a noticeable bump in the rear panel here that is difficult to repair. When prying the tab free, try to have the metal spudger pivot on the edge of the rear panel rather than bending the rear panel outward.

  • Using the metal spudger, disengage the single clip on the top of the iPod.

靠近显示屏的中心,将金属撬棒小心地插入塑料打开工具产生的间隙中。

在这里的后面板容易产生难以修复的明显的凹凸。 当撬开拉杆时,请尝试将金属撬棒枢转在后面板的边缘上,而不要将后面板向外弯曲。

使用金属撬棒,将iPod顶部的单个夹子脱开。

在开源创作共享许可协议下,你的投稿已被许可