跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的5指南

英语
中文

正翻译步骤 1

步骤 1
Remove 10 9mm screws with Tri-Wing size Y1 screwdriver around the outer case. Lift up on the back of case. Lift gently because the rumble motor in the back of the case is still connected by a cable to the motherboard.
  • Remove 10 9mm screws with Tri-Wing size Y1 screwdriver around the outer case.

  • Lift up on the back of case.

  • Lift gently because the rumble motor in the back of the case is still connected by a cable to the motherboard.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可