跳转到主内容
英语
中文

正翻译步骤 3

Step 3
Release the black ribbon clamp using an iPod opening tool to lift it. Remove the ribbon connecting the circuit board from the body of the camera using tweezers. The SD card reader is attached to the back of the circuit board. The circuit board and SD card combination should be replaced.
  • Release the black ribbon clamp using an iPod opening tool to lift it.

  • Remove the ribbon connecting the circuit board from the body of the camera using tweezers.

  • The SD card reader is attached to the back of the circuit board. The circuit board and SD card combination should be replaced.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可