跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
Unscrew 2 3.35mm phillips head screws from the face of the green circuit board using a #00 phillips head screwdriver. Caution: Do not tug on the circuit board. This will tear the ribbon connecting the circuit board to the body of the camera.
  • Unscrew 2 3.35mm phillips head screws from the face of the green circuit board using a #00 phillips head screwdriver.

  • Caution: Do not tug on the circuit board. This will tear the ribbon connecting the circuit board to the body of the camera.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可