Skip to main content
英语
中文

正翻译步骤 1

Step 1
Remove two 4.35mm phillips head screws from around the LCD screen using a #00 phillips head screwdriver. Caution: Do not tug on the LCD screen. This will tear the ribbon connecting the LCD screen to the body of the camera. Loosen the black ribbon clamp using an iPod opening tool
  • Remove two 4.35mm phillips head screws from around the LCD screen using a #00 phillips head screwdriver.

  • Caution: Do not tug on the LCD screen. This will tear the ribbon connecting the LCD screen to the body of the camera.

  • Loosen the black ribbon clamp using an iPod opening tool

  • Release the LCD screen by removing the ribbon from the body of the camera.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可