跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的30指南

英语
中文

正翻译步骤 1

步骤 1
Unplug your iMac's AC cord along with any peripheral devices. Lay your iMac face-down on a soft, clean surface as shown.
  • Unplug your iMac's AC cord along with any peripheral devices.

  • Lay your iMac face-down on a soft, clean surface as shown.

  • Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.

  • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

  • All three screws will remain captive in the access door.

  • Remove the access door.

将iMac面朝下放在柔软,干净的表面上,如图所示。

确保工作表面没有任何污垢或碎屑,因为它可能会划伤iMac正面的玻璃面板。我们建议在iMac和工作台面之间放一条毛巾。

拧松将维修孔盖固定到iMac底部边缘的三颗十字螺钉。

所有三个螺钉都将保持在维修孔盖中。

取下维修孔盖。

[* black] Unplug your iMac's AC cord along with any peripheral devices.
[* black] Lay your iMac face-down on a soft, clean surface as shown.
[* icon_caution] Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.
[* red] Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
[* icon_note] All three screws will remain captive in the access door.
[* black] Remove the access door.

在开源创作共享许可协议下,你的投稿已被许可