修复你的物品 社区 商店

iPhone 6s 电池更换

返回指南
英语
中文
上一步

正翻译步骤 5

步骤 5
iPhone 6s Battery Replacement, Battery Removal: 步骤 0 中的图像 1，1
Battery Removal

  • Remove the battery.

  • If your replacement battery came in a plastic sleeve, remove the sleeve before installation by pulling it away from the ribbon cable.

  • If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.

  • Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.

  • Adhere the battery, disconnect it, and continue reassembling your device.

  • If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.

  • Perform a forced restart after reassembly. This can prevent several issues and simplify troubleshooting.

拆除电池

从手机中取出电池。

如果你的更换电池上有一层塑料纸，请在安装之前撕下来。

如果手机中还有任何酒精溶液残留，请小心擦拭干净或让其自然晾干，然后再安装新电池。

在您粘贴新电池之前，请暂时将电池排线插入主板插座。这可以确保电池在其凹槽中正确对齐。

粘贴电池，断开连接，并继续重新组装您的设备。

若新电池上没有预先贴上胶带, 可参考指南 更换iPhone 电池胶带来更换电池胶带。

在组装好手机之后先强制重新启动一下。 强制重新启动iPhone6s这可以很简单地避免诸多可能的问题。

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。