跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 2

步骤 2
With the plastic opening tool, gently pry the front casing away from the device by carefully running the tool around each edge and lifting. Do not pull to remove the casing until all sides are loose. You may break or crack the case.
  • With the plastic opening tool, gently pry the front casing away from the device by carefully running the tool around each edge and lifting.

  • Do not pull to remove the casing until all sides are loose. You may break or crack the case.

  • Once case is loose, flip up and over the device. Note that casing is still connected to the device.

  • Using tweezers, pull connecting strip to disconnect it from its socket on the logic board.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可