跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南

英语
中文

正翻译步骤 17

步骤 17
There are two ribbon cables connecting the rear panel to the rest of the iPod. In the following step, be careful not to damage these ribbon cables.
  • There are two ribbon cables connecting the rear panel to the rest of the iPod. In the following step, be careful not to damage these ribbon cables.

  • Grasp the front panel assembly with one hand and the rear panel with the other.

  • Take a deep breath!

  • Gently (GENTLY) disengage the remaining clips on the rear panel by pulling the tops of the front and rear panels away from each other (think of the bottom of the iPod as a hinge), taking great care not to damage the ribbon cables holding the two halves together.

有两条排线将后面板连接到iPod的其余部分。 在以下步骤中,小心不要损坏这些排线。

用一只手握住前面板组件,将另一只手握住后面板。

深吸一口气

轻轻(轻轻)通过将前面板和后面板的顶部拉开彼此(将iPod的底部看作铰链),使后面板上的其余夹子脱开,注意不要损坏排线 将ipod两部分拿好。

在开源创作共享许可协议下,你的投稿已被许可