跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Use a nylon spudger to remove battery (do not yank out) (the battery may be glued down, if so pry around the sides of the battery gently and pop out). Carefully pull wire connected to battery from circuit board. Place the battery on table.
  • Use a nylon spudger to remove battery (do not yank out) (the battery may be glued down, if so pry around the sides of the battery gently and pop out).

  • Carefully pull wire connected to battery from circuit board.

  • Place the battery on table.

  • Replace old battery with a new one.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可