跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 3

Step 3
Note: It is recommended that step 3 and step 4 be completed simultaneously. The tabs are identical just on opposite sides. Viewing from the front of the printer, there is a tab in the lower left corner. Viewing the tab hole from the bottom of the printer.
  • Note: It is recommended that step 3 and step 4 be completed simultaneously. The tabs are identical just on opposite sides.

  • Viewing from the front of the printer, there is a tab in the lower left corner.

  • Viewing the tab hole from the bottom of the printer.

  • Insert the mini screwdriver into the marked hole and pry out the tab.

  • Push in towards the blue sticker of the printer while pulling up on the case at the same time. Use one of the tools to keep the tab pried open.

  • This tab is the easiest to break so be very careful.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可