跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 1

步骤 1
Remove the four H2 screws from the back of the phone. Do not lose the black rubber rings on the screws. Remove the two H2 screws, on either side of the phone. Do not lose the red seal that are on the screws. Using a prying tool work off the back of the case. Ensuring not to lose the port covers. Be careful to note the position of connector covers. Have the tabs at the end of the connectors in place before clipping the phone completely back together.
Outer Case
  • Remove the four H2 screws from the back of the phone. Do not lose the black rubber rings on the screws.

  • Remove the two H2 screws, on either side of the phone. Do not lose the red seal that are on the screws.

  • Using a prying tool work off the back of the case. Ensuring not to lose the port covers. Be careful to note the position of connector covers. Have the tabs at the end of the connectors in place before clipping the phone completely back together.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可