跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南

英语
意大利语

正翻译步骤 7

步骤 7
Use the flat end of a spudger to pry the left speaker connector up and out of its socket on the logic board. Be sure to pry on the cable connector and not on the socket on the logic board. Prying on the socket may cause it to separate from the logic board. Gently fold the cable up and out of the way of the logic board.
  • Use the flat end of a spudger to pry the left speaker connector up and out of its socket on the logic board.

  • Be sure to pry on the cable connector and not on the socket on the logic board. Prying on the socket may cause it to separate from the logic board.

  • Gently fold the cable up and out of the way of the logic board.

Usa l'estremità piatta di uno spudger per sollevare il connettore dell'altoparlante sinistro e staccarlo dal suo zoccolo sulla scheda logica.

Accertati di far leva sul connettore del cavo e non sul suo zoccolo sulla scheda logica. Far leva sullo zoccolo può portare al suo distacco dalla scheda logica.

Piega con delicatezza il cavo per allontanarlo dalla scheda logica.

在开源创作共享许可协议下,你的投稿已被许可