跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的7指南

英语
意大利语

正翻译步骤 6

步骤 6
Use the tip of a spudger to flip up the retaining flap on the microphone ribbon cable ZIF socket. Pull the microphone ribbon cable out of its socket, parallel to the logic board. Pull the microphone ribbon cable out of its socket, parallel to the logic board.
  • Use the tip of a spudger to flip up the retaining flap on the microphone ribbon cable ZIF socket.

  • Pull the microphone ribbon cable out of its socket, parallel to the logic board.

Usa l'estremità di uno spudger per sbloccare la linguetta di fissaggio sullo zoccolo ZIF del cavo a nastro del microfono.

Tira fuori dal suo zoccolo, in direzione parallela alla scheda logica, il cavo a nastro del microfono.

在开源创作共享许可协议下,你的投稿已被许可