跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
Prepare an iOpener and lay it over the top edge of the phone to loosen the tape connecting the EMI shield to the front panel. After a minute, insert an opening pick between the tape and display data cable. Push the pick downwards until it is flush with the upper edge of the EMI shield.
  • Prepare an iOpener and lay it over the top edge of the phone to loosen the tape connecting the EMI shield to the front panel.

  • After a minute, insert an opening pick between the tape and display data cable.

  • Push the pick downwards until it is flush with the upper edge of the EMI shield.

你需要准备一个iOpener, 将iOpener置于手机顶端的边缘处, 让黏在EMI电磁防护板与前面板的黏胶软化。

加热一分钟后, 在胶带与屏幕间插入塑胶片, 。

将塑胶片往下推, 直到碰到EMI电磁防护板的上缘为止。

在开源创作共享许可协议下,你的投稿已被许可