跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
意大利语

正翻译步骤 1

步骤 1
Remove the following seven 1.3 mm Phillips screws: Three screws each on the left and right edges of the display panel. A single screw recessed 1.5 cm from the right edge of the screen.
  • Remove the following seven 1.3 mm Phillips screws:

  • Three screws each on the left and right edges of the display panel.

  • A single screw recessed 1.5 cm from the right edge of the screen.

Rimuovi le seguenti sette viti Phillips da 1,3 mm:

Tre viti su ciascuno dei lati sinistro e destro del pannello display.

Una vite singola, 1,5 cm all'interno del lato destro dello schermo.

在开源创作共享许可协议下,你的投稿已被许可