跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 10

步骤 10
Keep the front of the lens face down. There are springs between the sensor and the lens which may fall out. Remove the three 4.0 mm Torx T5 screws attaching the sensor to the lens.
  • Keep the front of the lens face down. There are springs between the sensor and the lens which may fall out.

  • Remove the three 4.0 mm Torx T5 screws attaching the sensor to the lens.

  • Pull out the sensor.

  • Pull out the three springs on top of the lens.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可