跳转到主内容
英语
中文

正翻译步骤 8

步骤 8
Use a Phillips #000 screwdriver to remove all five 4.1mm screws from the piece you took off in the previous step. Gently pull the metal cover until it turns 180 degrees. The metal cover will not come all the way off because it will still be attached by ribbon cables.
  • Use a Phillips #000 screwdriver to remove all five 4.1mm screws from the piece you took off in the previous step.

  • Gently pull the metal cover until it turns 180 degrees.

  • The metal cover will not come all the way off because it will still be attached by ribbon cables.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可