跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Use a Phillips #000 screwdriver to remove the three 3.5 mm screws. Use a Phillips #000 screwdriver to remove the three 3 mm screws. In some models these may be T3 or T4 Torx screws.
  • Use a Phillips #000 screwdriver to remove the three 3.5 mm screws.

  • Use a Phillips #000 screwdriver to remove the three 3 mm screws.

  • In some models these may be T3 or T4 Torx screws.

  • Gently pull the copper plate towards you to remove it.

  • The sensor is attached to the copper plate and will come out with the copper plate. The thin, red glass plate glued to the front of the sensor is the infrared filter.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可