跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 1

步骤 1
You may need to use tweezers and a spudger to disconnect some of the ribbon cables so they do not break.
  • You may need to use tweezers and a spudger to disconnect some of the ribbon cables so they do not break.

  • Disconnect the nine visible ribbon cables/ZIF connectors by flipping the black bars up and pulling the ribbon straight out of the connector.

  • Disconnect two more cables in the upper left corner of the board, hidden behind the visible cables.

  • Learn more about disconnecting ZIF connectors here.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可