翻译步骤＃1 - Nintendo 3DS Back Cover Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的25指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

Unscrew the four Phillips #00 screws along the top of the back cover.
The screws are held in place by locking washers, and will not come out of the back cover.
The comments section is full of unlucky souls who will tell you that the screws here through step 4 will strip incredibly easily. Press down fairly hard, and go slow.

在开源创作共享许可协议下，你的投稿已被许可。