Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的22指南

英语
中文

正翻译步骤 3

Step 3
Use a spudger or a clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board. Use a spudger or a clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board.
  • Use a spudger or a clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board.

使用撬棒的平头或指甲断开前摄像头排线接口, 与主板分离。

[* black] Use the flat end of a spudger,spudger or a fingernail,clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board.
[* black] Use the flat end of a spudger,spudger or a fingernail,clean fingernail to disconnect the front camera flex cable by prying it straight up from its socket on the logic board.

在开源创作共享许可协议下,你的投稿已被许可