跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 2

步骤 2
Remove the two 5.2 mm Phillips #00 screws that are 1) below the label and 2) above the tripod mount hole on the bottom of the camera. You may ignore the screw below the tripod mount hole. Remove the two 5.5 mm Phillips #00 screws on the side of the camera with the MIC jack.
  • Remove the two 5.2 mm Phillips #00 screws that are 1) below the label and 2) above the tripod mount hole on the bottom of the camera.

  • You may ignore the screw below the tripod mount hole.

  • Remove the two 5.5 mm Phillips #00 screws on the side of the camera with the MIC jack.

  • Remove the two 7.0 mm Phillips #00 screws that are 1) above and 2) below the HDMI panel.

  • You may ignore the screw that goes through the leather material to the right of the HDMI panel.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可