第 1 步
Today i will explain how to replace the screen from a Nokia Lumia 920
第 2 步 — Bottom screws & sim card reader
Turn off your device BEFORE STARTING disassembly!
第 3 步 — Back cover
Try to make a little gap between the screen and the back cover. If needed, use the iSesamo Opening Tool.
第 4 步 — Connectors
Don't remove the back cover completely yet because it's still attached with a ribbon cable which you can easily rip apart.
第 5 步 — Screws
We're going to remove all screws in one step now. Please make sure to place them in a way that you know how to screw them back in place when reassembling the device. If you interchange the screws this might cause damage to your device.
第 6 步
Remove the metal plate at the bottom of the battery.
第 7 步 — Touch connector
Push up the touch array cable to disconnect it.
第 8 步 — Remove the cover of the motherboard
During this step, some components may fall out of their place, such as the speaker or SIM card cover, but you can easily put them back by slightly lifting up the logic board.