翻译步骤＃9 - Canon EOS Digital Rebel (300D) Back Casing Replacement - iFixit

修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南。

英语

中文

上一步

正翻译步骤 9

步骤 9

Locate the connector which holds the flat cable to the main circuit board. Unlock the connector by gently pulling up its black piece from the side the flat cable comes into it.

Pull the flat cable from the connector and you'll have completely removed the back casing from the camera.

Note I taped each of the screws to their original places on the removed back casing, so I don't loose or mix any of them.

Remove flat cable linking the camera's body to the back casing

Locate the connector which holds the flat cable to the main circuit board. Unlock the connector by gently pulling up its black piece from the side the flat cable comes into it.
Pull the flat cable from the connector and you'll have completely removed the back casing from the camera.
Note I taped each of the screws to their original places on the removed back casing, so I don't loose or mix any of them.

在开源创作共享许可协议下，你的投稿已被许可。