电池连接座

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的23本指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

Remove two Phillips screws securing the battery connector bracket to the logic board, of the following lengths:
One 2.9 mm screw
One 2.3 mm screw
Throughout this guide, keep careful track of your screws so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.