Skip to main content

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的6本指南

英语
中文

正翻译步骤 5

Step 5
To access and remove the fourth and final screw attaching the hood, the panel for the power button must be removed as follows: Reach into the mouth of the printer and press on the small clip behind the power button. This  allows the panel of the power button to be removed.
  • To access and remove the fourth and final screw attaching the hood, the panel for the power button must be removed as follows:

  • Reach into the mouth of the printer and press on the small clip behind the power button. This allows the panel of the power button to be removed.

  • A picture of the power button panel removed is provided to show the location of the clip that needs to be pressed.

  • After pressing the clip, pull out the power button panel by pulling from right to left.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可