iPad 2 Wi-Fi EMC 2415 Battery Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南。

英语

韩语

下一步

正翻译步骤 1

步骤 1

iPad 2 Wi-Fi EMC 2415 Battery Replacement: 步骤 0 中的图像 1，3

iPad 2 Wi-Fi EMC 2415 Battery Replacement: 步骤 0 中的图像 2，3

iPad 2 Wi-Fi EMC 2415 Battery Replacement: 步骤 0 中的图像 3，3

Reheat the iOpener in the microwave for one minute.
Remember to be careful not to overheat the iOpener during the repair procedure. Wait at least two minutes before reheating the iOpener, and never microwave it for more than one minute.
Place the heated iOpener on the back of the iPad just right of center (the side opposite the rear facing camera). Let it sit there for 90 seconds to soften the battery adhesive.
Move the iOpener to the center of the back of the iPad and let the iOpener sit for another 90 seconds.
If the iOpener cools significantly between sittings, reheat it for another minute.
Move the iOpener to the left edge (the side with the rear facing camera) of the back of the iPad and let the iOpener sit for another 90 seconds.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。