跳转到主内容

iPad 2 Wi-Fi EMC 2415 前置面板组件更换

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的39本指南

英语
中文

正翻译步骤 4

步骤 4
iPad 2 Wi-Fi EMC 2415 Front Panel Assembly Replacement: 步骤 0 中的图像 1,2 iPad 2 Wi-Fi EMC 2415 Front Panel Assembly Replacement: 步骤 0 中的图像 2,2
  • In order to remove the front panel assembly, the ribbon cable needs to slide out between the case and the LCD. You'll need to move the LCD to make some room.

  • Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its cable will remain connected while it is rotated over.

  • Lift the LCD from its long edge farthest from the digitizer cable and gently flip it toward the rear case—like closing a book.

  • While holding the LCD up, gently slide the front panel away from the iPad. Be careful not to snag the digitizer cable on the rear case or LCD.

  • Set the LCD back into the body for safekeeping.

为了拆卸前面板组件,带状电缆需要从机箱和 LCD 之间滑出。您需要移动 LCD 以腾出一些空间。

移动 LCD 时要非常小心,不要尝试将其从 iPad 上移除——旋转时其排线仍保持连接状态。

从距离数字化仪排线最远的长边提起 LCD 屏幕,然后轻轻地将其翻转向后壳——就像合上一本书一样。

抬起 LCD 屏幕,轻轻将前面板从 iPad 上滑开。小心不要将数字转换器排线挂在后壳或 LCD 屏幕上。

将 LCD 放回机身以便妥善保管。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利