跳转到主内容
英语
中文

正翻译步骤 3

步骤 3
Please be very careful!, This glass shatters easily and shards will go flying if you are rough The glass is connected to the frame and LCD by the world's strongest adhesive, .... took me well over an hour to remove the old screen Using a heat gun (high powered blow dryer) or those of you lucky enough to have an iopener kit slowly heat your way around the glass, start in a corner and work your spudger in.
Removing the old Broken Glass/Digitizer
  • Please be very careful!, This glass shatters easily and shards will go flying if you are rough

  • The glass is connected to the frame and LCD by the world's strongest adhesive, .... took me well over an hour to remove the old screen

  • Using a heat gun (high powered blow dryer) or those of you lucky enough to have an iopener kit slowly heat your way around the glass, start in a corner and work your spudger in.

  • Make sure you slide your spudger straight in to avoid the lcd There is a nice gap but the adhesive is two part!

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可