跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的39指南

英语
中文

正翻译步骤 2

步骤 2
Use the edge of a plastic opening tool to peel the digitizer cable off the shields on the logic board. Carefully pull the digitizer cable off the adhesive securing it to the side of the rear case.
  • Use the edge of a plastic opening tool to peel the digitizer cable off the shields on the logic board.

  • Carefully pull the digitizer cable off the adhesive securing it to the side of the rear case.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可