翻译步骤＃2 - iPad 2 Wi-Fi EMC 2415 LCD Replacement - iFixit

取消

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的28本指南。

英语

中文

上一步

正翻译步骤 2

步骤 2

The front panel ribbon cables are connected beneath the LCD. To access them, you'll need to temporarily flip the LCD over and out of the way.

Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its display data cable will remain connected while it is rotated over.

The front panel ribbon cables are connected beneath the LCD. To access them, you'll need to temporarily flip the LCD over and out of the way.
Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its display data cable will remain connected while it is rotated over.
Lift the LCD from its long edge closest to the volume buttons and gently flip it out of the rear case—like turning the page in a book.
Set the LCD face down on the front panel.

在开源创作共享许可协议下，你的投稿已被许可。