跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的4本指南

英语
中文

正翻译步骤 3

步骤 3
Carefully separate the two hood pieces connected by the black ribbon. Set the piece of the hood down such that no stress is applied to the scanner as it is attached by ribbon cable.
  • Carefully separate the two hood pieces connected by the black ribbon.

  • Set the piece of the hood down such that no stress is applied to the scanner as it is attached by ribbon cable.

  • The printer hood should now be in 2 pieces.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可