跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 6

步骤 6
The power supply can lifted out and rotated down and set on the workbench. Be very careful not to pull on the power supply as it will still be connected to the motherboard. Use ESD-safe tweezers to carefully disconnect the wi-fi antenna by pulling it straight up.
Disconnect WiFi Antenna
  • The power supply can lifted out and rotated down and set on the workbench.

  • Be very careful not to pull on the power supply as it will still be connected to the motherboard.

  • Use ESD-safe tweezers to carefully disconnect the wi-fi antenna by pulling it straight up.

  • Be be careful not to apply too much force on the WiFi connector as it can break off.

  • Do NOT use pliers as shown in this hastily taken photo.

  • After the WiFi cable is disconnected, de-route the cable from the two clips and under the optical drive cable.

此时可以抬起电源供应并将其旋转到一边置于工作台上。

请务必小心不要过于拉动电源供应单元,因为其仍然与主板相连着。

使用防静电钳子小心断开WIFI天线,把它直接拉出来。

请小心不要用太大力否则会使其损坏。

WIFI线缆拔下后,将线缆从线槽中两个卡子及光驱线缆下拉出。

在开源创作共享许可协议下,你的投稿已被许可