跳转到主内容
英语
中文

正翻译步骤 2

步骤 2
This is the easy part.  Remove the antenna. Move the wire inbetween the two solder points so it is connecting to the second point. Once there take your soldering Iron and heat up the solder and drag it over the wire to make the connection.
Solder it back
  • This is the easy part. Remove the antenna. Move the wire inbetween the two solder points so it is connecting to the second point. Once there take your soldering Iron and heat up the solder and drag it over the wire to make the connection.

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可