跳转到主内容

修复你的物品

维修的权力

商店

英语
中文

正翻译步骤 1

步骤 1
As you can see there are 2 solder points . the wire must run through the first point to the second point.  But when the system fell it broke that connection and Antenna got bent. If at factory the solder points were not correct it will cause the same lag issue with controller and WiFi.
What is Wrong?
  • As you can see there are 2 solder points . the wire must run through the first point to the second point. But when the system fell it broke that connection and Antenna got bent. If at factory the solder points were not correct it will cause the same lag issue with controller and WiFi.

如你所见这里有两处焊点。线必须通过第一个焊点到第二个焊点处。但是当设备掉落时,天线与触点被弯折了。如果在出厂时焊点不正确,也会在WiFi和手柄上发生同样的延迟问题。

在开源创作共享许可协议下,你的投稿已被许可