跳转到主内容
英语
中文

正翻译步骤 5

步骤 5
The printer has an automatic feature to clean the print head. Usually, there is a lot of ink (Probably melt with dust) in the area where the print head is cleaned Remove the 5 torx screw as shown in the picture Assuming the print head is now removed (Not shown on the picture), now gently tip the plastic plate and remove it
Cleaning the print head park slot
  • The printer has an automatic feature to clean the print head. Usually, there is a lot of ink (Probably melt with dust) in the area where the print head is cleaned

  • Remove the 5 torx screw as shown in the picture

  • Assuming the print head is now removed (Not shown on the picture), now gently tip the plastic plate and remove it

  • If you didn't put gloves yet, it is time to do it !

  • Now, push the carriage that holds the print head cleaning system (Red arrows)

  • The carriage that holds the print head cleaning system is now clean (Last picture)

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可