跳转到主内容

修复你的物品

维修的权力

配件 & 工具

英语
中文

正翻译步骤 3

步骤 3
Unscrew the 7 torx screws. Do not forget the one under the printer label (You have to remove the printer label.  Lower right corner). Push the clips at the rear of the LCD panel and pull the LCD panel outwards at the same time Then, pull the ribbon connected to the LCD panel to disconnect the LCD panel from the printer.
Removing the printer hood
  • Unscrew the 7 torx screws. Do not forget the one under the printer label (You have to remove the printer label. Lower right corner).

  • Push the clips at the rear of the LCD panel and pull the LCD panel outwards at the same time

  • Then, pull the ribbon connected to the LCD panel to disconnect the LCD panel from the printer.

  • Remove the 2 remaining torx screws hidden by the LCD panel

  • See where are clips (Blue arrows)

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可